DBGA-80 8” IPS Double-Bar

DBGA-80 8” IPS Double-Bar

The DBGA-80 Double Bar Squeeze Tool offers an economical means of squeezing-off large diameter PE pipe using the proper procedure. The tool must be centered and square to the pipe. After torquing to "tight", allow cold flow relaxation of one minute per diameter inch of pipe size. After re-torquing the screw, install the saddle clamp bolts in an even pattern. The evenly distributed compressive force on the flattened pipe is needed for precise squeeze-off.

Mustang Model DBGA-80 Squeeze Tool and the SC-80 Saddle Clamps combination mechanically accommodate large diameter PE pipe squeeze-off requirements. The design incorporates a tubular frame, powerful Acme Power Screw amd Upper Jaw Thrust Bearing with grease fittings for lubricating the screw and thrust bearing.


Weight:

Squeeze Tool — 92 lbs.

Lower Bar — 30 lbs.

Capacity: Specify (2) Size

3" IPS, 4" IPS, 6" IPS, 8" IPS

Pipe Size Normal Wall Thickness SDR Gap Stop % Max Squeeze
3" IPS .259 13.5 .435 26
.307-.318 11-11.5 .500 29
4" IPS .333 13.5 .560 25
.395-.409 11-11.5 .675 26
6" IPS .427 15.5 .725 22
.491 13.5 .813 26
.568-.602 11-11.5 1.0 26
8" IPS .557 15.5 .935 26
.639 13.5 1.125 21
.750 11.5 1.250 28